ICON 2005-UP Toyota Hilux 0-3″ Lift Suspension Systems
Although many think the Hilux is more or less similar to a Tacoma it is, in fact, a very different vehicle.
The frame is very stout, and the rear suspension is designed for more load and service than a Tacoma. These differences prompted an approach to this international chassis that was quite different than the USDM counterpart. In standard fashion, ICON engineers took an all-encompassing approach and addressed the Hilux’s suspension as a whole rather than focusing on one particular component. The result of this is a dramatic increase in wheel travel and damping ability, translating into outstanding vehicle control and ride quality both on and off-road.
This unique approach to vehicle dynamic theory allows our team to maximize performance.
By developing coilovers, shocks, control arms, and other products designed to work at their full potential together, these parts are organized into several stages that suit different driving styles and intended uses. Each stage offers 0–3” of lift for larger, more aggressive wheel and tire combinations. The Toyota Hilux Stage 1 system provides a baseline level of performance that drastically improves ride characteristics. Increasing stages add features such as rear shackles, remote reservoir shocks, upper control arms, and ICON’s Compression Damping Control (CDC) Valve.
ICON Vehicle Dynamics’ Toyota Hilux suspension systems have been designed with maximum performance in mind.
The stiffer chassis allows for a much more robust overall shock tune, delivering sufficient damping ability across varying terrains and payloads. Rear lift is achieved using a leaf spring lift shackle, maintaining the factory load rating while adding up-travel. This level of attention to detail makes ICON Vehicle Dynamics suspension systems the ultimate solution for the Toyota Hilux.
KEY FEATURES
- Increased wheel travel and ride quality over stock
- Vehicle-specific tuned front and rear shocks for superior damping and control
- Adjustable coilovers provide 0–3″ of lift height
- CNC-machined 6061 aircraft-grade aluminum components
- Corrosion-resistant CAD-plated coilover shock body with 7/8″ shaft
- FK rod end bearings for extended longevity and minimal deflection
- 100% bolt-on system, no drilling, cutting, or welding required
- Made in the USA
Share on:
No comments yet. Be the first to add comment!
Leave a comment
Please note, comments must be approved before they are published.
