2022-23 Toyota Tundra 6" Performance Suspension Systems
ICON is proud to introduce a range of 6-inch Complete Suspension System "Stage" kits for 2022 and newer Toyota Tundra. All feature our high clearance 4-inch drop front crossmember kit including a differential skid plate and ductile iron steering knuckles. The crossmember and knuckles drop the front differential 4 inches to preserve CV-joint operating angles, achieving maximum travel while being safe on components and providing great handling characteristics both on- and off-road.
We've pre-configured nine Stages of suspension systems to meet just about any level of performance expectations and budget. Spacer-based Stage 1 retains the stock front coilovers and rear springs to economically fit up to 37" tires. At the other end of the spectrum our fully loaded Stage 9 features a full complement of billet control arms along with ICON 2.5 VS Coilovers and Shocks featuring cutting-edge CDEV electronic performance technology. Every Stage of our 6-Inch Tundra Systems includes all of the necessary drop brackets, spacers or mounts needed to allow bind-free movement of both the front and rear suspension to coax maximum performance out of every component in the kit.
KEY FEATURES
- All ICON 6-Inch Subframe Suspension Systems for 2022 and newer Toyota Tundra feature:
- Designed to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
- Maintains factory track width
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate, provides 6" front suspension lift with only 4" of crossmember drop
- Single piece high-strength ductile iron steering knuckles
- Sway bar drop brackets to reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- Includes high angle outer tie-roads with durable, metal on metal greaseable tie rod ends
- Replaceable steering stops
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
- See additional equipment and more detailed information for each of the Nine Stages below.
TECH NOTES
The following tech and fitment data applies to all of these Suspension System Stages:
- OEM Wheels & Tires Fitment: No
- Recommended Aftermarket Wheels: ICON Alloys | 20x9" w/ 5.625” Backspace / 16mm Offset
- Recommended Aftermarket Tires: 37" x 12.50" (Larger tires may fit but fender trimming and modifications will be required.)
- APPLICATION NOTE #85: ADVERTISED LIFT HEIGHT RANGES ARE FOR A STOCK EQUIPPED VEHICLE. INCREASING WEIGHT OF VEHICLE DUE TO ACCESSORIES WILL ALTER LIFT RANGE.
- APPLICATION NOTE #142: NOT COMPATIBLE WITH TUNDRAS EQUIPPED WITH LOAD-LEVELING REAR HEIGHT CONTROL AIR SUSPENSION.
- APPLICATION NOTE #144: NOT COMPATIBLE WITH TRD PRO (applies to Stage 1 only)
- APPLICATION NOTE #154: NOT COMPATIBLE WITH TUNDRA SR5 EQUIPPED WITH TRD SPORT PACKAGE (applies to Stage 1 only)
- APPLICATION NOTE #155: MAY REQUIRE RECALIBRATION OF TOYOTA SAFETY SENSE SYSTEM AFTER INSTALL
- APPLICATION NOTE NOT COMPATIBLE WITH AVS equipped vehicles
- Ships in multiple boxes
STAGE 1
K53271 22-23 TOYOTA TUNDRA 6" STAGE 1 SUSPENSION SYSTEM
SYSTEMS INCLUDE
- 51010 22-23 TUNDRA FRONT BOX KIT 1*
- 51011 22-23 TUNDRA FRONT BOX KIT 2*
- 51012 22-23 TUNDRA REAR BOX KIT*
- 51014 22-23 TUNDRA FRONT KNUCKLE KIT
- 51015 22-23 TUNDRA / 23 SEQUOIA 6" COILOVER SPACER KIT
- 51016 22-23 TUNDRA REAR COIL SPACER KIT
- 51017 22-23 TUNDRA FRONT SKID PLATE
- 56517 22-23 TUNDRA 6" REAR 2.0 VS IR (2)
KEY FEATURES:
- Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Maintains factory track width
- Front coilover spacer kit with heavy duty steel construction
- Provides 6" front suspension lift with only 4" of crossmember drop
- Single piece high-strength ductile iron steering knuckles
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
- Included sway bar drop brackets reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
- 2.0 Aluminum Series rear shocks to improve rear suspension performance
- Rear coil spring spacer kit to provide lift while retaining factory rear coil springs
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
*BOX KITS INCLUDE (APPLIES TO ALL STAGES):
51010 22-23 TUNDRA FRONT BOX KIT 1
- Front Crossmember
- Rear Crossmember
51011 22-23 TUNDRA FRONT BOX KIT 2
- Sway Bar Drop
- Brake Line Brackets
- Outer Tie Rods
- Bump Extensions
51012 22-23 TUNDRA REAR BOX KIT
- Brake Line Brackets
- Track Bar Bracket
- Sway Bar Link Mounts
- Foam Axle Pads
STAGE 2
K53272T 22-23 TOYOTA TUNDRA 6" STAGE 2 SUSPENSION SYSTEM TUBULAR
K53272 22-23 TOYOTA TUNDRA 6" STAGE 2 SUSPENSION SYSTEM BILLET
SYSTEMS INCLUDE
- 51010 22-23 TUNDRA FRONT BOX KIT 1*
- 51011 22-23 TUNDRA FRONT BOX KIT 2*
- 51012 22-23 TUNDRA REAR BOX KIT*
- 51014 22-23 TUNDRA FRONT KNUCKLE KIT
- 58672 22-23 TUNDRA 2.5 VS IR 6" COILOVER KIT
- 51016 22-23 TUNDRA REAR COIL SPACER KIT
- 51017 22-23 TUNDRA FRONT SKID PLATE
- 58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
- or 58561DJ 22-23 TUNDRA/23 SEQUOIA BILLET UCA DJ PRO KIT
- 56517 22-23 TUNDRA 6" REAR 2.0 VS IR (2)
KEY FEATURES:
- 2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control
- System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
- Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Maintains factory track width
- Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
- Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
- Tubular or billet aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction; billet UCAs provide on-vehicle caster/camber adjustment for optimum drivability
- Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
- Single piece high-strength ductile iron steering knuckles
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
- Included sway bar drop brackets reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
- 2.0 Aluminum Series rear shocks provide balanced tune with the front coilovers
- Rear coil spring spacer kit to provide lift while retaining factory rear coil springs
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
STAGE 3
K53273T 22-23 TOYOTA TUNDRA 6" STAGE 3 SUSPENSION SYSTEM TUBULAR
K53273 22-23 TOYOTA TUNDRA 6" STAGE 3 SUSPENSION SYSTEM BILLET
SYSTEMS INCLUDE
- 51010 22-23 TUNDRA FRONT BOX KIT 1*
- 51011 22-23 TUNDRA FRONT BOX KIT 2*
- 51012 22-23 TUNDRA REAR BOX KIT*
- 51014 22-23 TUNDRA FRONT KNUCKLE KIT
- 58771 22-23 TUNDRA 2.5 VS RR 6" COILOVER KIT
- 51016 22-23 TUNDRA REAR COIL SPACER KIT
- 58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
- or 58561DJ 22-23 TUNDRA/23 SEQUOIA BILLET UCA DJ PRO KIT
- 51017 22-23 TUNDRA FRONT SKID PLATE
- 56517R 22-23 TUNDRA 6" REAR 2.0 VS RR (2)
KEY FEATURES:
- 2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling
- System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
- Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Maintains factory track width
- Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
- Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
- Tubular or billet aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction; billet UCAs provide on-vehicle caster/camber adjustment for optimum drivability
- Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
- Single piece high-strength ductile iron steering knuckles
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
- Included sway bar drop brackets reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
- 2.0 Aluminum Series rear shocks with remote reservoirs provide balanced tune with the front coilovers and increased fluid volume for better heat dissipation
- ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
STAGE 4
K53274T 22-23 TOYOTA TUNDRA 6" STAGE 4 SUSPENSION SYSTEM TUBULAR
K53274 22-23 TOYOTA TUNDRA 6" STAGE 4 SUSPENSION SYSTEM BILLET
SYSTEMS INCLUDE
- 51010 22-23 TUNDRA FRONT BOX KIT 1*
- 51011 22-23 TUNDRA FRONT BOX KIT 2*
- 51012 22-23 TUNDRA REAR BOX KIT*
- 51014 22-23 TUNDRA FRONT KNUCKLE KIT
- 58771 22-23 TUNDRA 2.5 VS RR 6" COILOVER KIT
- 51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
- 58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
- or 58561DJ 22-23 TUNDRA/23 SEQUOIA BILLET UCA DJ PRO KIT
- 51017 22-23 TUNDRA FRONT SKID PLATE
- 57841P 22-23 TUNDRA 6" REAR 2.5 VS RR PAIR
KEY FEATURES:
- 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
- System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
- Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Maintains factory track width
- Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
- Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
- Tubular or billet aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction; billet UCAs provide on-vehicle caster/camber adjustment for optimum drivability
- Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
- Single piece high-strength ductile iron steering knuckles
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
- Included sway bar drop brackets reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
- ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
STAGE 5
K53275T 22-23 TOYOTA TUNDRA 6" STAGE 5 SUSPENSION SYSTEM TUBULAR
K53275 22-23 TOYOTA TUNDRA 6" STAGE 5 SUSPENSION SYSTEM BILLET
SYSTEMS INCLUDE
- 51010 22-23 TUNDRA FRONT BOX KIT 1*
- 51011 22-23 TUNDRA FRONT BOX KIT 2*
- 51012 22-23 TUNDRA REAR BOX KIT*
- 51014 22-23 TUNDRA FRONT KNUCKLE KIT
- 58771 22-23 TUNDRA 2.5 VS RR 6" COILOVER KIT
- 51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
- 58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
- or 58561DJ 22-23 TUNDRA/23 SEQUOIA BILLET UCA DJ PRO KIT
- 54002 22-23 TUNDRA/23 SEQUOIA BILLET REAR LOWER LINK KIT
- 51017 22-23 TUNDRA FRONT SKID PLATE
- 57841P 22-23 TUNDRA 6" REAR 2.5 VS RR PAIR
KEY FEATURES:
- 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
- System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
- Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Maintains factory track width
- Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
- Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
- Tubular or billet aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction; billet UCAs provide on-vehicle caster/camber adjustment for optimum drivability
- Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
- Single piece high-strength ductile iron steering knuckles
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
- Included sway bar drop brackets reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
- ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
- High clearance billet rear lower links feature FK Rod Ends to improve rear end articulation and allow on-vehicle adjustment for different ride heights and pinion angles using ICON's double adjuster system; replaceable nylon rock sliders to protect the link from trail damage
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
STAGE 6
K53276T 22-23 TOYOTA TUNDRA 6" STAGE 6 SUSPENSION SYSTEM TUBLUAR
K53276 22-23 TOYOTA TUNDRA 6" STAGE 6 SUSPENSION SYSTEM BILLET
SYSTEMS INCLUDE
- 51010 22-23 TUNDRA FRONT BOX KIT 1*
- 51011 22-23 TUNDRA FRONT BOX KIT 2*
- 51012 22-23 TUNDRA REAR BOX KIT*
- 51014 22-23 TUNDRA FRONT KNUCKLE KIT
- 58771C 22-23 TUNDRA 2.5 VS RR CDCV 6" COILOVER KIT
- 51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
- 58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
- or 58561DJ 22-23 TUNDRA/23 SEQUOIA BILLET UCA DJ PRO KIT
- 51017 22-23 TUNDRA FRONT SKID PLATE
- 57841CP 22-23 TUNDRA 6" REAR 2.5 VS CDCV RR PAIR
KEY FEATURES:
- 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
- System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
- Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Maintains factory track width
- Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
- Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
- Tubular or billet aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction; billet UCAs provide on-vehicle caster/camber adjustment for optimum drivability
- Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
- Single piece high-strength ductile iron steering knuckles
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
- Included sway bar drop brackets reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
- ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
STAGE 7
K53277T 22-23 TOYOTA TUNDRA 6" STAGE 7 SUSPENSION SYSTEM TUBULAR
K53277 22-23 TOYOTA TUNDRA 6" STAGE 7 SUSPENSION SYSTEM BILLET
SYSTEMS INCLUDE
- 51010 22-23 TUNDRA FRONT BOX KIT 1*
- 51011 22-23 TUNDRA FRONT BOX KIT 2*
- 51012 22-23 TUNDRA REAR BOX KIT*
- 51014 22-23 TUNDRA FRONT KNUCKLE KIT
- 58771C 22-23 TUNDRA 2.5 VS RR CDCV 6" COILOVER KIT
- 51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
- 58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
- or 58561DJ 22-23 TUNDRA/23 SEQUOIA BILLET UCA DJ PRO KIT
- 51017 22-23 TUNDRA FRONT SKID PLATE
- 57841CP 22-23 TUNDRA 6" REAR 2.5 VS CDCV RR PAIR
- 54002 22-23 TUNDRA/23 SEQUOIA BILLET REAR LOWER LINK KIT
- 54102 22-23 TUNDRA/23 SEQUOIA BILLET REAR UPPER LINK KIT
- 54202 22-23 TUNDRA/23 SEQUOIA BILLET REAR ADJ TRACK BAR KIT
KEY FEATURES:
- ICON's Compression Damping Electronic Valves (CDCV) provide easy manual adjustment of compression damping for each shock with 10 settings from soft to firm
- System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
- Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Maintains factory track width
- Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
- 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
- Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
- Tubular or billet aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction; billet UCAs provide on-vehicle caster/camber adjustment for optimum drivability
- Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
- Single piece high-strength ductile iron steering knuckles
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
- Included sway bar drop brackets reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
- ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
- Billet rear upper and high clearance lower links feature FK Rod Ends to improve rear end articulation and allow on-vehicle adjustment for different ride heights and pinion angles using ICON's double adjuster system
- Billet rear lower links have replaceable nylon rock sliders to protect the link from trail damage
- On-vehicle adjustable billet rear track bar properly centers rear axle while also improve rear suspension performance
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
STAGE 8
K53278T 22-23 TOYOTA TUNDRA 6" STAGE 8 SUSPENSION SYSTEM TUBLUAR
K53278 22-23 TOYOTA TUNDRA 6" STAGE 8 SUSPENSION SYSTEM BILLET
SYSTEMS INCLUDE
- 51010 22-23 TUNDRA FRONT BOX KIT 1*
- 51011 22-23 TUNDRA FRONT BOX KIT 2*
- 51012 22-23 TUNDRA REAR BOX KIT*
- 51014 22-23 TUNDRA FRONT KNUCKLE KIT
- 58771E 22-23 TUNDRA 2.5 VS RR CDEV 6" COILOVER KIT
- 51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
- 58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
- or 58561DJ 22-23 TUNDRA/23 SEQUOIA BILLET UCA DJ PRO KIT
- 51017 22-23 TUNDRA FRONT SKID PLATE
- 57841EP 22-23 TUNDRA 6" REAR 2.5 VS CDEV RR PAIR
KEY FEATURES:
- ICON's Compression Damping Electronic Valve (CDEV) technology allows for in vehicle adjustment of compression damping settings and active adjustment via IIC
- ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make on-the-fly, near instantaneous compression damping adjustments on CDEV-equipped shocks
- System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
- Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Maintains factory track width
- Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
- 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
- Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
- Tubular or billet aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction; billet UCAs provide on-vehicle caster/camber adjustment for optimum drivability
- Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
- Single piece high-strength ductile iron steering knuckles
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
- Included sway bar drop brackets reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
- ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension
STAGE 9
K53279T 22-23 TOYOTA TUNDRA 6" STAGE 9 SUSPENSION SYSTEM TUBLUAR
K53279 22-23 TOYOTA TUNDRA 6" STAGE 9 SUSPENSION SYSTEM BILLET
SYSTEMS INCLUDE
- 51010 22-23 TUNDRA FRONT BOX KIT 1*
- 51011 22-23 TUNDRA FRONT BOX KIT 2*
- 51012 22-23 TUNDRA REAR BOX KIT*
- 51014 22-23 TUNDRA FRONT KNUCKLE KIT
- 58771E 22-23 TUNDRA 2.5 VS RR CDEV 6" COILOVER KIT
- 51013 22-23 TUNDRA REAR 3.5 COIL SPRING KIT
- 58461DJ 22-23 TUNDRA/23 SEQUOIA TUBULAR UCA DJ PRO KIT
- or 58561DJ 22-23 TUNDRA/23 SEQUOIA BILLET UCA DJ PRO KIT
- 51017 22-23 TUNDRA FRONT SKID PLATE
- 57841EP 22-23 TUNDRA 6" REAR 2.5 VS CDEV RR PAIR
- 53508 22-23 TUNDRA/23 SEQUOIA IIC INSTALL KIT
- 54002 22-23 TUNDRA/23 SEQUOIA BILLET REAR LOWER LINK KIT
- 54102 22-23 TUNDRA/23 SEQUOIA BILLET REAR UPPER LINK KIT
- 54202 22-23 TUNDRA/23 SEQUOIA BILLET REAR ADJ TRACK BAR KIT
KEY FEATURES:
- ICON's Compression Damping Electronic Valve (CDEV) technology allows for in vehicle adjustment of compression damping settings and active adjustment via IIC
- ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make on-the-fly, near instantaneous compression damping adjustments on CDEV-equipped shocks
- System allows for up to 40% increase in front wheel travel over stock without overstressing OE components
- Optimized design to fit 37" tires with full articulation (larger tires may fit but fender trimming and modifications will be required)
- Maintains factory track width
- Optimized suspension geometry nearly eliminates the bump steer found in stock Tundras
- 2.5 Series front coilovers and rear shocks with remote reservoirs for superior damping and vehicle control along with improved shock cooling
- Adjustable front ride heights from 5-6” of front lift over stock (up to 6" of lift with only 4" of crossmember drop)
- Tubular or billet aluminum UCAs with Delta Joint Pro for added strength, durability, and caster correction; billet UCAs provide on-vehicle caster/camber adjustment for optimum drivability
- Patented Delta Joint Pro (U.S. Pat. 10,731,700) provides improved durability and serviceability with 90 degrees of total articulation
- Single piece high-strength ductile iron steering knuckles
- Hight clearance front crossmembers and front skid plate, CNC Laser Cut and brake-formed from 1/4-inch steel plate
- Included sway bar drop brackets reduce bind in OE sway bar links
- Front and rear heavy-duty bump stop brackets
- High angle outer tie-roads feature durable, metal on metal greaseable tie rod ends
- ICON engineered custom triple rate rear coil springs provide progressive spring rates for a comfortable ride on-road as well as stability and control during aggressive off-road driving
- Billet rear upper and high clearance lower links feature FK Rod Ends to improve rear end articulation and allow on-vehicle adjustment for different ride heights and pinion angles using ICON's double adjuster system
- Billet rear lower links have replaceable nylon rock sliders to protect the link from trail damage
- On-vehicle adjustable billet rear track bar properly centers rear axle while also improve rear suspension performance
- Improved rear sway bar links and mounts, and rear track bar bracket to reduce bind in the rear suspension