951.689.icon

Categories

Newsletter

2014-UP Ford Expedition 4WD .75-2.25" Suspension System - Stage 1

http://iconvehicledynamics.com/shop/4091-thickbox/2014-up-ford-expedition-4wd-75-225-suspension-system-stage1.jpg *Images may not represent actual product

$4,115.90

K93301

ICON Vehicle Dynamics

124.00 lb

Calculated at checkout

» Add to my wishlist

OVERVIEW:

Like any application that makes its way into ICON’s research and development department, the Ford Expedition was examined thoroughly in stock form in an attempt to find where the OE components were limiting performance or could be improved upon. After hours of in-house R&D and thousands of miles of real-world testing a collection of ICON components including front and rear coilovers and upper control arms were organized into two staged suspension systems that each delivers a unique level of performance to the Expedition. A remarkable level of performance is established with the 2.5 Series remote reservoir CDC Valve shocks included in ICON’s Stage 1 system, and only improves with the addition of upper control arms (tubular steel or billet aluminum) in the Stage 2 systems. These systems drastically increase the vehicle’s ride quality, reduce body roll, maximize wheel travel, and provide a lift height range of .75-2.25” to allow for the fitment of larger, more aggressive wheel and tire combinations. A bolt-on design also makes for an easy install with the ability for the vehicle to be returned to stock if needed.

 

KEY FEATURES:

• Increased wheel travel and ride quality over stock with no change in towing capacity

• Unique valving developed specifically for the 2014-UP Expedition

• Vehicle specific tuned front and rear shocks for superior damping and vehicle control

• Adjustable coilovers from .75-2.25" of lift height

• 6061 Aircraft grade aluminum CNC machined components

• Corrosion resistant CAD plated coilover shock body with 7/8" shaft

• High strength alloy CNC machined lower bar pin

• FK rod end bearings for extended longevity and minimal deflection

• 100% Bolt-on system - no drilling, cutting, or welding necessary for install

 

WHEEL & TIRE FITMENT INFO:

OEM Wheels & Tires: Yes

Aftermarket Wheels: 8.5" Wide Wheel With 5" Backspace

Aftermarket Tires: 33 x 11.50 Tall Tires

(Larger Tires May Fit but Fender Trimming and Modifications will be Required)

 

SYSTEM COMPONENTS:

91820C (QTY.1) | 14-UP EXPEDITION 4WD .75-2.25" FRT 2.5 VS RR CDCV COILOVER KIT

91821C (QTY.1) | 14-UP EXPEDITION 4WD .75-2.25" REAR 2.5 VS RR CDCV COILOVER KIT

 

OPTIONS:

198000 | ICON 2 PIN SPANNER WRENCH

191009 | ICON NEOPRENE SHOCK COVERS

Write your review

2014-UP Ford Expedition 4WD .75-2.25" Suspension System - Stage 1

2014-UP Ford Expedition 4WD .75-2.25" Suspension System - Stage 1

Write your review

  • Installation Kit Instructions:

  • This product has no installation kit instructions yet